|
Post by onetontoy on Feb 26, 2010 23:51:23 GMT -5
do work son
|
|
|
Post by crusty on Mar 1, 2010 22:46:47 GMT -5
do work son You too fawker!!! I combined the ifs rear springs with my lift springs, lost about 2-3 inches from the front. I also moved the axle foward about an 1 1/4". Need to turn the botom leaf around cause after moving the spring further forward on the axle it gives it a place for it to "S". If I turn it around it will extend further forward and would eliminate where it is bending, hopefully.
|
|
|
Post by CRAZY BASTARD on Mar 1, 2010 23:10:49 GMT -5
chop chop i am ready to go wheelin
|
|
|
Post by crusty on Mar 7, 2010 20:05:34 GMT -5
Swapped the power steering pump and bracket with the one from the hydro kit. I also pulled all of the old power steering lines and resivoir off. Weds. I should be able to mount the resivoir bracket. Next Sunday if it is still a-go I will be dragging it down to Leadfoot's to have him help me weld up the ram mount and the, weld bungs in the tie rods.
|
|
|
Post by 77oneton on Mar 8, 2010 1:05:16 GMT -5
nice, now if i get the springs from him, and have a piece of tube bent. hopefully im ready too.
|
|
|
Post by crusty on Mar 8, 2010 22:00:31 GMT -5
Found out my tires should be here this week!!
|
|
|
Post by crusty on Mar 12, 2010 22:38:25 GMT -5
Got my tires yesterday. got the ARP hub studs today. Gonna bleed the brakes and afro-amercanize my steering to get it to Nicks on Sunday tomorrow, also will fill the diffs....
|
|
|
Post by 77oneton on Mar 17, 2010 15:28:16 GMT -5
when you gonna be ready?
|
|
|
Post by crusty on Mar 17, 2010 21:25:33 GMT -5
Soon, MABE could go on the 28th. Might be more like the 31st or the 4th. I got the ram mounted, just need to find a 5/8 allen. Mounted the resivoir, mounted the orbital, mounted 3 of the tires, mounted the steering cooler. Still need to install tie rods, run all the hoses (might need to find a different fitting for the feed to the pump), get some fluid, bleed the system, set the toe, and mount the last tire.
|
|
|
Post by CRAZY BASTARD on Mar 17, 2010 22:33:12 GMT -5
looks good almost there want to race to the finish.
|
|
|
Post by chevtech on Mar 17, 2010 23:35:47 GMT -5
I should have a 5/8" allen @ work, I'll look in the morning and let you know.
|
|
|
Post by 77oneton on Mar 17, 2010 23:50:48 GMT -5
looks awesome, almost like a New front axle! i think you'll like the hydro!
|
|
|
Post by crusty on Mar 18, 2010 1:25:00 GMT -5
I should have a 5/8" allen @ work, I'll look in the morning and let you know. Alright, Thanks. I am going to try to make it to Harbor Frieght. Might not be a bad idea to have one...just in case.
|
|
|
Post by CRAZY BASTARD on Mar 18, 2010 7:15:51 GMT -5
ill look in the tool box in the blazer tomarrow i think i carry one in there justin
|
|
|
Post by crusty on Mar 18, 2010 22:48:28 GMT -5
I bought a whole set for like 15 bucks, thanks anyways guys!!
|
|