|
Post by CRAZY BASTARD on Jun 3, 2011 23:29:19 GMT -5
I have some work to do this weekend to get it ready to head over to bend. I need to put some new springs in the rear, cause I bent them last weekend. Break the tires down and install pvcs. (Thanks for doing the leg work on those nick.) Harry took my winch into warn for me and had it gone through. Turns out it was the wrong motor on it. They put a new motor, new cyleniods, clutch pack and new seals in it. Pretty much brand new now. Thanks for the hook up to get it in and back in a day and a half harry.
|
|
|
Post by CRAZY BASTARD on Jun 6, 2011 21:59:09 GMT -5
|
|
|
Post by CRAZY BASTARD on Jun 7, 2011 17:49:31 GMT -5
Put door bars in for ground hog
|
|
|
Post by crusty on Jun 7, 2011 17:56:16 GMT -5
So you competeing then??
|
|
|
Post by CRAZY BASTARD on Jun 7, 2011 18:01:55 GMT -5
Yep sure am just got every thing finished up on it to pass the tec today. Put my first aid kit back in barrowed a winch wieght from 77 oneton. Put the door bars in new oil absorbant pads and a new extinguisher.
|
|
|
Post by CRAZY BASTARD on Jul 24, 2011 9:40:01 GMT -5
Got the back cut off for the bobing project. Have to clean up the cuts a little and do a comp style cut. Then mount the fuel cell and swag cooler. Took 17 and 1/2 inches off toatal from back of bumper to cut line.
|
|
|
Post by crusty on Jul 24, 2011 15:25:47 GMT -5
Sweet, makes it nice being able to walk out into your garage instead of driving across town to work on it.......
|
|
|
Post by onetontoy on Jul 24, 2011 16:33:46 GMT -5
nice
|
|
|
Post by popeye on Jul 24, 2011 21:02:37 GMT -5
Will you guys quit changing shit I can't keep up lol looking good Steve
|
|
|
Post by 2manytoys on Jul 25, 2011 9:29:44 GMT -5
That ought to help the ol' departure angle!!
|
|
|
Post by CRAZY BASTARD on Jul 25, 2011 21:42:58 GMT -5
Yep been wanting to do it for awhile now, it also gives me more room to get around it in the garage so no better time then now to do it.
|
|
|
Post by CRAZY BASTARD on Aug 9, 2011 21:06:55 GMT -5
Got the fuel cell in and started on the sheet metal work on the back. Also got the PSC pump installed that I warrentied out, now the steering is working awsome again.
|
|
|
Post by CRAZY BASTARD on Aug 28, 2011 1:18:55 GMT -5
|
|
|
Post by JayBeanie on Aug 29, 2011 17:05:51 GMT -5
Nice. When you going to take it to the strip club?
|
|
|
Post by 78blazer on Oct 25, 2011 15:56:48 GMT -5
Where did you pick up your hydro ram mount.
|
|