|
Post by 2manytoys on Mar 30, 2011 14:03:34 GMT -5
How much is left on that list?
|
|
|
Post by popeye on Mar 31, 2011 10:30:16 GMT -5
How much is left on that list? the major stuff is x-member, steering, exaust, and finish up the front axle then all the other tinker damn junk welding, gussets, wireing, and ? ? ? the stock in-put shaft and the ord shaft. see the bearing i got a little excited and had to pull it apart because the bearing goes into the adapter with a big snap ring to hold it in. its alltogether ready to put it back in
|
|
|
Post by 2manytoys on Mar 31, 2011 15:40:22 GMT -5
Your list looks a lot like mine, minus the steering, & wiring.
|
|
|
Post by popeye on Apr 1, 2011 10:44:19 GMT -5
put the doubler back in last night
|
|
|
Post by popeye on Apr 15, 2011 17:18:02 GMT -5
got a x-member built this one goes under the doubler gonna still build one for under the trans all painted and purty and these rattle can sprayer things are awsome no finger cramps and my paint jobs actully looks almost good
|
|
|
Post by popeye on Apr 16, 2011 15:41:10 GMT -5
got a few things done last night. drank alot of beer, took the factory 205 torque mount and made it work didnt get pic. my buddy tyson cut out some gussets for the shackle hangers before after
|
|
|
Post by popeye on May 31, 2011 10:42:57 GMT -5
did a little bit of work this week end. got the super joints installed in the shafts and put them in the axle the joints are huge! no needle bearings just some anti-seize looking grease old shaft soo small next to new one. 35 spline inner and outer when i installed the new rotor's i drilled the bearing hub for 9/16 wheel stud to replace the stock 1/2" wheel stud
|
|
|
Post by 2manytoys on May 31, 2011 12:52:11 GMT -5
Those axles should hold up! Good progress.
|
|
|
Post by CRAZY BASTARD on May 31, 2011 20:47:59 GMT -5
Nice work zack now hurry up.
|
|
|
Post by crusty on May 31, 2011 22:57:16 GMT -5
Hurry up!!!! I need an extra seat to ride in till my shit is fixed!!
|
|
|
Post by popeye on Jun 3, 2011 17:20:21 GMT -5
got my pvc inserts for my hummer wheels today...thanks for the help nick
|
|
|
Post by popeye on Jun 6, 2011 16:21:48 GMT -5
went over to sixstates this morning got drivelines coming, also did small stupid stuff over the weekend
|
|
|
Post by CRAZY BASTARD on Jun 6, 2011 17:32:48 GMT -5
Although small its not stupid it all crap that needs done.
|
|
|
Post by crusty on Jun 6, 2011 18:13:18 GMT -5
I got a little peek, peek this morning, it's looking like a rig again. It's definently cool!
|
|
|
Post by 2manytoys on Jun 6, 2011 18:28:21 GMT -5
Sweet, looking forward to seeing it.
|
|