83hotrod
Broken Axle
That's a good rock there paw paw
Posts: 117
|
Post by 83hotrod on Feb 14, 2011 1:11:17 GMT -5
Got a decent start on the trailer modifications hopefully be wrapped all up soon
|
|
|
Post by crusty on Feb 20, 2011 14:05:30 GMT -5
|
|
83hotrod
Broken Axle
That's a good rock there paw paw
Posts: 117
|
Post by 83hotrod on Feb 21, 2011 1:13:52 GMT -5
Ran outta gas for the welder today hindered the finishing of the trailer. Waiting on a windshield gasket so that i can get new window in and cage on to finish this project
|
|
|
Post by 77oneton on Feb 21, 2011 19:29:43 GMT -5
your gas welding that outside?
|
|
83hotrod
Broken Axle
That's a good rock there paw paw
Posts: 117
|
Post by 83hotrod on Feb 21, 2011 20:34:30 GMT -5
My Argon/ Co2 mix for my mig
|
|
|
Post by 77oneton on Feb 22, 2011 19:53:41 GMT -5
doesnt matter what gas, i was asking if you were OUTSIDE! usually u weld with gas indoors, since the wind blows the gas away! just curious
|
|
|
Post by CRAZY BASTARD on Feb 22, 2011 21:48:21 GMT -5
I weld with gas out side all the time. As long as you turn the gas up a little more and its not super windy it works just fine.
|
|
83hotrod
Broken Axle
That's a good rock there paw paw
Posts: 117
|
Post by 83hotrod on Feb 23, 2011 3:28:06 GMT -5
Yeah sorry. Welding outside, shops full with 2 rigs right now. Never had an issue with welding outside, wind wasn't bad.
|
|
83hotrod
Broken Axle
That's a good rock there paw paw
Posts: 117
|
Post by 83hotrod on Feb 25, 2011 1:29:11 GMT -5
Windshield in, Cage on tomorrow. Maybe have trailer finished by end of weekend
|
|
83hotrod
Broken Axle
That's a good rock there paw paw
Posts: 117
|
Post by 83hotrod on Feb 27, 2011 19:35:00 GMT -5
|
|
|
Post by 2manytoys on Feb 28, 2011 10:18:54 GMT -5
Sweet!! Looks like it is ready to roll.
|
|
|
Post by crusty on Feb 28, 2011 10:57:05 GMT -5
Looks like its got a nice stance to it.
|
|
83hotrod
Broken Axle
That's a good rock there paw paw
Posts: 117
|
Post by 83hotrod on Feb 28, 2011 13:31:21 GMT -5
Backs a Tad lower then the front. We'll see what happens after springs break in. The carb needs adjusting,motor is acting up a bit. Thinking it's the choke.
|
|
|
Post by onetontoy on Mar 1, 2011 0:38:14 GMT -5
thing looks good
|
|
83hotrod
Broken Axle
That's a good rock there paw paw
Posts: 117
|
Post by 83hotrod on Mar 7, 2011 14:36:01 GMT -5
Does anyone know someone who can cut out some bead lock rings for me or know where i can find a reasonable set of weld on ones pre-cut?
|
|