|
|
Post by swampthing on Sept 6, 2010 20:27:02 GMT -5
|
|
|
|
Post by swampthing on Sept 6, 2010 20:38:50 GMT -5
|
|
|
|
Post by JayBeanie on Sept 7, 2010 1:10:56 GMT -5
|
|
|
|
Post by JayBeanie on Sept 7, 2010 1:19:37 GMT -5
|
|
|
|
Post by onetontoy on Sept 8, 2010 22:55:38 GMT -5
weres the vid of the lower  |
|
|
|
Post by JayBeanie on Sept 9, 2010 0:40:57 GMT -5
|
|
|
|
Post by swampthing on Sept 9, 2010 3:26:32 GMT -5
 woooh you rock
|
|
|
|
Post by JayBeanie on Sept 9, 2010 22:48:00 GMT -5
|
|
|
|
Post by crusty on Sept 12, 2010 14:55:48 GMT -5
|
|
|
|
Post by JayBeanie on Sept 12, 2010 17:23:14 GMT -5
|
|
|
|
Post by crusty on Sept 12, 2010 20:32:53 GMT -5
Wow, that popped out good!!!
|
|
Buzzer
4x4 Junkie
90% of the time, I have not F*cking Idea what I'm talking about!
Posts: 406
|
Post by Buzzer on Sept 12, 2010 21:40:16 GMT -5
came out pretty damb good!.... lol...nice shoes!
|
|
|
|
Post by shortbus on Sept 12, 2010 23:24:36 GMT -5
|
|
|
|
Post by shortbus on Sept 13, 2010 0:25:03 GMT -5
Almost forgot.... Trail repair #11 Complaint: Automatic transmission will not shift between gears Cause: Hole melted in cable housing causing cable to bend out of housing and not allowing cable to shift transmission Correction: Remove shift cable and housing. locate troubled area. remove heat sheild. Pull cable tight inside housing. Cut beer can and wrap tight around troubled area. Wrap duct tape around beer can to hold in place. Wrap troubled area with beer again for added strength and then duct tape and then zip ties. re install cable and wheel Archers and Hogs Back.  Uploaded with ImageShack.us |
|
|
|
Post by leadfoot on Sept 13, 2010 11:16:42 GMT -5
That beer wasn't drank on the trail was it? LOL
|
|
Already been working on the 4Runner. By no means perfect, but better than nothing. I decided not to mud it up but down the road I'll put a flat urban camo paint job on it.
